Limited Time Discount Offer 30% Off - Ends in 02:00:00

×

Juniper JN0-530 Exam - Juniper Networks Certified Internet Specialist (JNCIS-FWV)

Questions & Answers for Juniper JN0-530

Showing 1-15 of 150 Questions

Question #1 - Topic 0

Which three (3) of the following priority settings would ensure that a device is always the
master of a VSD group? Assume that the other device in the group uses default priority.

A. 25

B. 78

C. 84

D. 103

E. 208

Question #2 - Topic 0

Which four (4) components of a NetScreen device can be unique to a virtual system?

A. VPNs

B. routes in a shared virtual router

C. policies

D. administrators

E. pre-defined services

F. address book entries

Question #3 - Topic 0

How can you view the value of a Phase 1 pre-shared key on a device running ScreenOS
5.0 or later?

A. get ike gateway

B. get ike pre-share

C. get conf | inc gateway

D. You cannot retrieve the pre-shared key value. It is encrypted and cannot be viewed.

Question #4 - Topic 0

What bits of DSCP mapping do NetScreen devices use?

A. first 3 bits

B. first 4 bits

C. last 2 bits

D. last 3 bits

E. last 4 bits

Question #5 - Topic 0

As a root level administrator you are trying to reassign an interface in VSYS CorpA to
VSYS CorpB. What is the proper procedure?

A. 1. Remove the IP address. 2. Export the interface from within the CorpA VSYS. 3. Import the interface into the CorpB from within the CorpB VSYS

B. 1. Remove the IP address. 2. Set the zone to null. 3. Export the interface from within the CorpA VSYS. 4. Import the interface from within the CorpB VSYS

C. 1. Remove the IP address. 2. Set the zone to null. 3. Export the interface from the root VSYS. 4. Import the interface from within the CorpB VSYS

D. 1.Remove the IP address 2. Set the zone to null. 3. Export the interface from within CorpA. 4. Assign the interface to CorpB from the root VSYS

Question #6 - Topic 0

Your NetScreen device has come under a SYN attack. What Severity level would you
search for in the logs to see this event?

A. Alert

B. Critical

C. Warning

D. Emergency

E. Notifications

Question #7 - Topic 0

Which three (3) items are automatically copied from one NetScreen device to the other
once NSRP is configured?

A. DNS

B. Policies

C. Hostname

D. VSD priority

E. Address Books

Question #8 - Topic 0

What is the best description of an Active/Passive configuration?

A. One NetScreen device is passing traffic. The other device is in a power off state and will turn on once a failure is detected.

B. One NetScreen device is passing traffic. The other device is in a backup mode and will activate only if the active device completely fails.

C. One NetScreen device is passing traffic. The other device is in backup mode. If a monitored interface fails or the entire active device fails all traffic is transferred to the backup device.

D. One NetScreen device is passing traffic. The other device is in backup mode. Failover is on an interface-by-interface basis - if E1 fails on one device, it will become active on the other device.

Question #9 - Topic 0

Which two (2) commands would build a valid default gateway to a NetScreen device using
1 virtual router and having a next hop of 1.1.1.1?

A. set route 0.0.0.0/0 int untrust

B. set route 1.1.1.1 gateway 0.0.0.0/0

C. set route 0.0.0.0/0 interface untrust gateway 1.1.1.1

D. set vr trust-vr route 0.0.0.0/0 gateway 1.1.1.1

E. set route 0.0.0.0/255.255.255.255 gateway 1.1.1.1

Question #10 - Topic 0

Which two (2) statements are correct?

A. RA stands for Registration Agent

B. RA stands for Registration Authority

C. An RA is required in order to run a CA

D. An RA distributes registration information

E. An RA accepts registration requests on behalf of a CA

Question #11 - Topic 0

Click the Exhibit button.
Review the exhibit. What two (2) things can you tell about the traffic that was captured in
this debug output?

A. NAT is occurring on the ingress interface

B. Traffic is between two user defined zones

C. The gateway configured is either invalid or not up

D. After NAT the final destination for the packet is 1.1.8.254

Question #12 - Topic 0

What formula does NetScreen use to determine which policies will be checked when traffic
enters the device?

A. NetScreen builds an index on source IP and searches only those policies matching the source IP of the ingress packet

B. NetScreen checks all policies that have been created with a special algorithm that checks all policies with fewer CPU cycles

C. NetScreen builds an index on destination IP and searches only those policies matching the destination IP of the ingress packet

D. NetScreen checks a subset of all policies based on the ingress zone of the packet combined with the egress zone of the packet

Question #13 - Topic 0

You create a policy-based VPN, and select an address group for the source address. What
will be the source part of the proxy-id seen by the remote security gateway?

A. 0.0.0.0/0

B. The last member of the address group

C. The first member of the address group

D. A string of all of the addresses in the address group

E. The subnet that contains all addresses in the address group

Question #14 - Topic 0

You want to export an interface to the root VSYS. When you view the list of interfaces you
do not see the export option. What three (3) things must be done to make the interface
exportable?

A. The interface must be in the null zone

B. The interface must be in a predefined zone

C. The interface must be placed in a shared zone

D. The interface must have the IP address removed

E. The interface must have all sub-interfaces removed

Question #15 - Topic 0

What three (3) items do you need to download and install on your NetScreen device for IKE
gateways to be able to use digital certificates without OCSP?

A. The CRL list

B. The SCEP list

C. A local Certificate

D. The CA public key certificate

E. The CA private key Certificate

You Need Avanset VCE Player in Order to Open VCE Files

AUTUMN SALE: 30% DISCOUNT
This is ONE TIME OFFER

You save
30%

Enter Your Email Address to Receive Your 30% Discount Code

AUTUMN SALE: 30% DISCOUNT

You save
30%

Use Discount Code:

A confirmation link was sent to your e-mail.

Please check your mailbox for a message from [email protected] and follow the directions.